Mechanical Ceramic Parts

Mechanical Ceramic Parts

Mechanical ceramic parts are the working components of pumps, valves, seals and bearing arrangements that are made from ceramic in place of metal: seal faces, plungers, guide bushes, wear rings and the small structural pieces between a moving part and a static one. What makes such a part mechanical rather than general is that its surfaces are designed around a function: a seal face is flat enough to hold a film, a guide bush is round enough not to bind, a plunger is straight enough to keep its clearance along the whole stroke.
Send Inquiry

Product Description

 

Mechanical ceramic parts are the working components of pumps, valves, seals and bearing arrangements that are made from ceramic in place of metal: seal faces, plungers, guide bushes, wear rings and the small structural pieces between a moving part and a static one. What makes such a part mechanical rather than general is that its surfaces are designed around a function: a seal face is flat enough to hold a film, a guide bush is round enough not to bind, a plunger is straight enough to keep its clearance along the whole stroke. The same drawing can therefore call for very different finishing on different faces, and the finishing is what the part is bought for.


With mechanical parts, we finish each face for the job it does rather than machining everything the same way. Seal faces are lapped flat, guide surfaces are ground round, and structural faces are left as fired where nothing slides against them, so you pay for the finishing your assembly actually needs. Tell us where the part sits and what runs against it, and we will agree the finishing route on the drawing before production; matched pairs for a seal are produced from one reference and a sample pair is sent for a bench test.

 

Specifications

01536fda-e9c1-45efd15273aa1c

Application 1. Mechanical seal faces. A seal relies on a film of product between two flat faces, and a face that is not flat leaks regardless of the material. A lapped alumina face holds that film and resists the abrasive particles a metal face would scratch on.

Application 2. Pump plungers and guide bushes. A plunger has to stay straight and a bush has to stay round, or the pair binds and the drive loads up. Ground alumina holds both dimensions and does not corrode in the process fluid.

Application 3. Valve and bearing wear rings. A wear ring sets the clearance that a valve or a bearing runs on. A ceramic ring holds that clearance because it does not gall or rust against the mating part.

Customization

 

Geometry, bore, face width, chamfer, groove and mounting features are produced from drawing, with the finishing route agreed per function: lapped faces, ground bores, or as-fired structural surfaces. Buyers may specify flatness, roundness, bore tolerance and the surface roughness at the working face. Drawings and samples are accepted, OEM and ODM are supported, and a custom sample takes about 15 days.

 

Packaging & Transportation

 

Parts are wrapped in bubble film and separated in a foam-lined inner box so lapped faces cannot touch. Inner boxes go into export corrugated cartons; heavy sets are packed in fumigated wooden cases with the IPPC mark. Cartons carry fragile, this side up and keep dry marks, and a shipping mark with order number, carton number and destination. EXW and FOB Shanghai or Ningbo are available.

 

Specifications

Parameter

Specification

Material

99% alumina ceramic

Bulk Density

3.6 g/cm³ or more

Hardness

HRA90 or more

Bending Strength

300 MPa or more

Max Working Temperature

1500°C

Size Tolerance

±0.1 mm or less

product-900-675

 

FAQ

 

Q1. Which surfaces are lapped and which are left as fired?

A. That is agreed on the drawing by function: sealing and sliding faces are lapped or ground, and structural faces are left as fired so cost is not added where nothing contacts them.

Q2. Can you match a seal face pair?

A. Yes. Both faces of a pair are lapped to the flatness the seal needs, and a sample pair is supplied for a bench test before the production run.

Q3. What is the minimum order?

A. Orders start at RMB 1,000 in value, enough for a trial set of one part number.

 

Hot Tags: mechanical ceramic parts, China mechanical ceramic parts manufacturers, factory, Alumina Ceramic Ring, Ceramic Getter Plate, Ceramic Nozzle Spray, Industrial Ceramic Balls, Industrial Ceramic Rollers, Industrial Ceramics Products

Send Inquiry

Send Inquiry