Ceramic Linear Guide Rails
Product Description
Ceramic linear guide rails are the long, straight bars that set the path for a sliding carriage in automation equipment, textile machines, electronic assembly stations and instruments. The rail is the reference the whole axis is built on: a carriage running on it follows a line, and every position the machine repeats is measured from that line. A rail that bows over its length makes the carriage bind at the ends and run loose in the middle, and no adjustment at the carriage can correct a bent rail, which is why the bar is ground along its full length on a bed that establishes the line. The running face is the working surface and the mounting face is the one that seats on the machine.
When a machine builder replaces a guide rail, the axis should not have to be re-aligned around it. We grind the rail along its full length on a bed that sets the line and keep that bed for your part number, so a rail supplied later fits the carriage that was built around the first ones. Length, cross section and mounting holes come from your drawing, and the running face is finished to the roughness your carriage needs. Send the carriage or the axis drawing, and we will match the rail to it rather than to a stock size.
Specifications

Application 1. Automation slides and pick-and-place axes. A pick-and-place axis repeats the same stroke millions of times, and any drift in the guide line shows up as placement error. A straight, wear-resistant rail keeps the carriage on the same line instead of developing a bow.
Application 2. Textile machine traverses. A traverse rail runs at speed in a humid mill, where a steel rail rusts and its surface pits. Alumina holds Ra0.4 and does not corrode, so the carriage runs quietly and the yarn path stays true.
Application 3. Precision instrument stages. An instrument stage has to move without stiction or vibration. A ground ceramic rail gives a hard, low-friction surface that does not gall, and its insulation keeps the stage electrically isolated.
Customization
Rail length, cross section, mounting hole positions and end treatment are produced from drawing, with the running face ground to the straightness and roughness the axis needs. Buyers may specify the straightness band over the full length rather than per metre, and the surface finish at the running face. Drawings and samples are accepted, OEM and ODM are supported, and a custom sample takes about 15 days.
Packaging & Transportation
Rails are wrapped in bubble film with EPE at the ends, then packed in a rigid inner box or a wooden carrier so the bar cannot flex in transit. Long rails travel in fumigated wooden cases with the IPPC mark, blocked along their length. Cartons and cases carry fragile and this side up marks, and a shipping mark with order number, carton number and destination. EXW and FOB Shanghai or Ningbo are available.
Specifications
|
Parameter |
Specification |
|
Material |
99% alumina ceramic |
|
Straightness |
0.1 mm/m or better |
|
Surface Roughness |
Ra0.4 or better |
|
Hardness |
HRA90 or more |
|
Max Working Temperature |
1500°C |
|
Size Tolerance |
±0.1 mm or less |

FAQ
Q1. Can you hold straightness over the full length?
A. Yes. The rail is ground along its full length on a bed that sets the line, and straightness is agreed as a value over the complete rail rather than per metre only.
Q2. How are long rails protected in shipment?
A. They travel in a rigid carrier or a wooden case blocked along the length, so the bar cannot bow under its own weight in transit.
Q3. What is the minimum order?
A. Orders start at RMB 1,000 in value, which covers a trial rail for one axis.
Hot Tags: ceramic linear guide rails, China ceramic linear guide rails manufacturers, factory, Abrasion Resistant Ceramic Tiles, Alumina Ceramic Lining Tiles, Alumina Ceramic Rod, Industrial Ceramic Balls, Industrial Ceramics Products, New Energy Ceramics
You Might Also Like
Send Inquiry

