Ceramic Transport Rollers

Ceramic Transport Rollers

Ceramic transport rollers are the small, precise rollers that carry the product itself rather than a belt: they form the contact surface in film and foil handling, textile take-up, printing and coating, and electronic assembly conveyors where the roller touches the work directly. Here the roller is not a support but a working surface: any run-out repeats at the same point on every revolution, and any mark on the face is printed onto the product.
Send Inquiry

Product Description

 

Ceramic transport rollers are the small, precise rollers that carry the product itself rather than a belt: they form the contact surface in film and foil handling, textile take-up, printing and coating, and electronic assembly conveyors where the roller touches the work directly. Here the roller is not a support but a working surface: any run-out repeats at the same point on every revolution, and any mark on the face is printed onto the product. The roller therefore has to be round, straight along its length and smooth at the face, and its ends have to be square so it does not wobble as it turns. Diameter consistency across a set is part of the same requirement, since rollers at different heights change web tension from one to the next.

 

Because these rollers touch the product, your yield depends on how true they run, so we grind the outside diameter and the ends in one setup and finish the face to the smoothness your material needs. A set supplied together sits at one height, which keeps web tension even along the line instead of varying roller by roller. Tell us the material you handle and the tension you run at, and we will agree the face finish and the diameter band; those stay on file, so a replacement roller does not send a ripple through the process it is fitted into.

 

Specifications

01536fda-e9c1-45efd15273aa1c

Application 1. Film, foil and paper handling lines. A roller that is not round marks a film on every revolution at the same position. A ground ceramic roller runs true, and its hard surface does not pick up or scratch the web.

Application 2. Textile take-up and guide rollers. Yarn and fabric contact the roller under tension, and a rough surface creates a fault line in the material. Alumina holds Ra0.4 and does not rust in a humid mill, so the contact stays clean.

Application 3. Electronic assembly conveyors. Small parts ride directly on the roller, so any run-out shifts the part's position. Ceramic roundness and diameter consistency keep the part where the placement head expects it.

Customization

 

Outside diameter, length, bore or shaft configuration, end detail and surface finish are produced from drawing, with the diameter and ends ground from one axis. Buyers may specify roundness, the diameter band across a set, and the roughness the product requires. Drawings and samples are accepted, OEM and ODM are supported, and a custom sample takes about 15 days.

 

Packaging & Transportation

 

Rollers are wrapped in bubble film with EPE at both ends, then packed in an inner box so the finished surface cannot rub. Inner boxes go into export corrugated cartons; long or heavy rollers are packed in fumigated wooden cases with the IPPC mark. Cartons carry fragile and this side up marks, and a shipping mark with order number, carton number and destination. EXW and FOB Shanghai or Ningbo are available.

 

Specifications

Parameter

Specification

Material

99% alumina ceramic

Diameter Tolerance

±0.05 mm or less

Roundness

0.01 mm or less

Hardness

HRA90 or more

Max Working Temperature

1500°C

Surface Roughness

Ra0.4 or better

product-900-675

 

FAQ

 

Q1. Can you hold roundness and diameter together?

A. Yes. Diameter and ends are ground on one setup, so roundness and end squareness come from the same axis and the roller does not wobble.

Q2. Will a replacement roller match the existing set?

A. The diameter is held across the batch and the setup is retained, so a replacement sits at the same height as the rollers already in the line.

Q3. What is the minimum order?

A. Orders start at RMB 1,000 in value, which covers a trial roller or a small set.

 

Hot Tags: ceramic transport rollers, China ceramic transport rollers manufacturers, factory, Alumina Ceramic Ring, Ceramic Base, Ceramic Guide Rail, Ceramic Industrial Blades, Ceramic Shaft Sleeve, industrial ceramics

Send Inquiry

Send Inquiry