Chemical Resistant Ceramics

Chemical Resistant Ceramics

Chemical resistant ceramics are the alumina parts placed in contact with acids, alkalis, brines and oxidising solutions in chemical plant, water treatment, plating lines, laboratories and pharmaceutical equipment. These are the positions where metal cannot survive: a steel tray in a pickling line is eaten through, a plastic tray deforms at temperature, and a corroding part also contaminates the bath it sits in.
Send Inquiry

Product Description

 

Chemical resistant ceramics are the alumina parts placed in contact with acids, alkalis, brines and oxidising solutions in chemical plant, water treatment, plating lines, laboratories and pharmaceutical equipment. These are the positions where metal cannot survive: a steel tray in a pickling line is eaten through, a plastic tray deforms at temperature, and a corroding part also contaminates the bath it sits in. The ceramic part is usually a liner, a tray, a plate, a support or a nozzle, and it does two jobs at once, it holds the medium away from the structure and it stays unchanged in the medium, so the chemistry stays within its control band and the part does not have to be replaced every campaign.


In chemical service a part is rarely lost to corrosion alone; it goes where corrosion and abrasion work together, or where a soft gasket under a ceramic has already been eaten by the medium. We produce the part to your drawing in the grade that suits the duty, finish the surfaces that contact the medium according to what flows past them, and hold the joint and clearance dimensions on the finished piece so you are not re-shimming with a material that will fail next. Tell us the medium and the temperature, or send the failed part, and we will agree the grade with you.

 

Specifications

01536fda-e9c1-45efd15273aa1c

Application 1. Pickling and plating lines. Acid baths eat a metal tray or a metal hanger, and the corrosion products contaminate the bath. Alumina is inert to the bath and does not leach, so the part lasts and the chemistry stays within its control band.

Application 2. Water treatment and dosing equipment. Brine, hypochlorite and lime slurry attack metal and swell elastomers. A ceramic plate or nozzle does not swell, soften or corrode, so the dose stays where it was set.

Application 3. Laboratory and pharmaceutical equipment. Where a surface contacts a reagent or a product stream, it has to be clean and inert. Dense alumina can be cleaned repeatedly and does not release ions into the process.

Customization

 

Outline, thickness, bore, slot, tray form and support geometry are produced from drawing, in 95% or 99% alumina according to the duty. Buyers may specify the surfaces that contact the medium, the joint or clearance dimensions, and the grade for the temperature and the chemistry. Drawings and samples are accepted, OEM and ODM are supported, and a custom sample takes about 15 days.

 

Packaging & Transportation

 

Parts are wrapped in bubble film and packed in an inner box sized to the outline, with edges protected by EPE. Heavy plates and trays travel in fumigated wooden cases with the IPPC mark, blocked to prevent movement. Cartons carry fragile and this side up marks, and a shipping mark with order number, carton number and destination. EXW and FOB Shanghai or Ningbo are available.

 

Specifications

Parameter

Specification

Material

95% or 99% alumina ceramic

Corrosion Resistance

Acid and alkali resistant

Bulk Density

3.6 g/cm³ or more

Hardness

HRA90 or more

Compressive Strength

2000 MPa or more

Max Working Temperature

1500°C

product-900-675

 

FAQ

 

Q1. Which grade suits a hot acid duty?

A. 95% covers a straightforward acid duty at moderate temperature; the 99% grade is used where the duty is hotter or the medium is more aggressive, so the part matches the campaign.

Q2. Does the ceramic leach into the bath?

A. A dense alumina body does not leach into the process, which is why it is used where a corroding metal part would contaminate the chemistry.

Q3. What is the minimum order?

A. Orders start at RMB 1,000 in value, enough for a trial plate or a small set.

 

Hot Tags: chemical resistant ceramics, China chemical resistant ceramics manufacturers, factory, advanced ceramics, Alumina Ceramic Products, Ceramic Valve Liner, Chemically Bonded Ceramics, Specialty Ceramics

Next:No Information

Send Inquiry

Send Inquiry