Advanced Engineering Ceramics

Advanced Engineering Ceramics

Advanced engineering ceramics are the high-purity parts used where a standard industrial grade is not enough: components for semiconductor equipment, precision instruments, laser systems, medical devices and vacuum apparatus. What separates a part in this class from a general one is not the shape but the body and the surface: a high-purity body has fewer glassy phases at the grain boundaries, so it holds its surface through a chemical clean, releases less into a vacuum, and can be machined and lapped to a fine limit without the edge breaking down.
Send Inquiry

Product Description

 

Advanced engineering ceramics are the high-purity parts used where a standard industrial grade is not enough: components for semiconductor equipment, precision instruments, laser systems, medical devices and vacuum apparatus. What separates a part in this class from a general one is not the shape but the body and the surface: a high-purity body has fewer glassy phases at the grain boundaries, so it holds its surface through a chemical clean, releases less into a vacuum, and can be machined and lapped to a fine limit without the edge breaking down. These parts are usually one-off designs with a narrow tolerance and a surface requirement attached, so the route from drawing to a measured prototype is part of what is being bought.


New designs in this range rarely work first time, so we produce a prototype from your drawing, measure it, and report back the dimensions that could not be held before a tool is committed. Because pressing and finishing are both in house, the change is made on the real process rather than assumed on paper, and you see the corrected part before the production batch. Send the specification and the surfaces that face the process, and we will tell you what the route can hold and what needs a design adjustment.

 

Specifications

01536fda-e9c1-45efd15273aa1c

Application 1. Semiconductor equipment parts. A part inside process equipment must not release particles or ions into the chamber. A high-purity alumina body has fewer glassy phases at the grain boundaries, so the surface stays stable through chemical cleans.

Application 2. Laser and optical system mounts. An optical mount has to hold a position and not move with temperature. Alumina has a low thermal expansion for a ceramic and a stiff body, so the mount keeps the optic where it was set.

Application 3. Medical and analytical instruments. Where a part contacts a reagent or sits in a cleaned instrument, it must be inert and machinable to a fine tolerance. Dense, high-purity alumina meets both and does not corrode in repeated cleaning.

Customization

 

Outline, bore, groove, flatness, surface finish and grade are produced from drawing, with a prototype supplied before tooling is committed where the design is new. Buyers may specify purity, the tolerance stack at critical features, and the surface finish required by the process. Drawings and samples are accepted, OEM and ODM are supported, and a custom sample takes about 15 days.

 

Packaging & Transportation

 

Parts are wrapped individually in bubble film and packed in a foam-lined inner box so finished surfaces cannot touch, then in export corrugated cartons. High-value sets travel in fumigated wooden cases with the IPPC mark. Cartons carry fragile, this side up and keep dry marks, and a shipping mark with order number, carton number and destination. EXW and FOB Shanghai or Ningbo are available.

 

Specifications

Parameter

Specification

Material

99% or more alumina ceramic

Bulk Density

3.6 g/cm³ or more

Hardness

HRA90 or more

Bending Strength

300 MPa or more

Max Working Temperature

1600°C

Size Tolerance

±0.1 mm or less

product-900-675

 

FAQ

 

Q1. Can you supply a prototype before tooling?

A. Yes. A prototype is produced from the drawing and measured, and the dimensions that could not be held are reported so the design can be adjusted before a tool is committed.

Q2. How is a high-purity grade different from 95%?

A. A higher-purity body has fewer glassy phases at the grain boundaries, which is why it holds its surface through chemical cleaning and releases less in a vacuum.

Q3. What is the minimum order?

A. Orders start at RMB 1,000 in value, which is enough for a prototype or a small evaluation batch.

 

Hot Tags: advanced engineering ceramics, China advanced engineering ceramics manufacturers, factory, advanced ceramics, Alumina Ceramic Products, Ceramic Valve Liner, Chemically Bonded Ceramics, Specialty Ceramics

Send Inquiry

Send Inquiry