Ceramic Insulating Rings

Ceramic Insulating Rings

Ceramic insulating rings are the flat or shouldered rings that isolate one part of an assembly from another: a metal shaft from a housing, a heating conductor from a frame, a terminal from a panel, a lamp holder from a metal body. The ring is defined by three dimensions at once, its inner diameter, its outer diameter and its thickness, because the wall between the two diameters is the insulation path and the thickness sets how far apart the two parts are held.
Send Inquiry

Product Description

 

Ceramic insulating rings are the flat or shouldered rings that isolate one part of an assembly from another: a metal shaft from a housing, a heating conductor from a frame, a terminal from a panel, a lamp holder from a metal body. The ring is defined by three dimensions at once, its inner diameter, its outer diameter and its thickness, because the wall between the two diameters is the insulation path and the thickness sets how far apart the two parts are held. Rings are pressed and then finished on the bore, the outside and the faces, and the grade is chosen to the duty: alumina where the ring also sees heat or a chemical, steatite where the requirement is electrical insulation at a lower cost.


An insulating ring is fitted between two parts that are already made, so it has to match dimensions that already exist rather than a nominal size. We finish the bore, the outside and the faces in one setup, so the wall does not run thin on one side and the ring does not tilt when it is clamped, and where a ring has to sit in a recess the step is formed in the tool and the height checked on the finished piece. Send the measured shaft or the housing, and we will produce the ring to that, then keep the drawing for your reorders.

 

Specifications

01536fda-e9c1-45efd15273aa1c

Application 1. Shaft and housing isolation. A ring between a shaft and a housing breaks the conductive path while keeping the two parts concentric. Because the bore and the outside are finished from one setup, the wall stays even and the ring does not tilt under clamp load.

Application 2. Heating appliance and terminal insulation. A ring under a terminal or around a heating conductor holds the live part away from the frame. Alumina keeps that distance at temperature, where a moulded plastic ring would soften and creep.

Application 3. Lamp holders and instrument assemblies. A ring in a lamp holder or an instrument separates a hot or live part from a metal body. A pressed and finished ceramic ring holds its thickness, so the gap it sets does not change over the life of the assembly.

Customization

 

Inner diameter, outer diameter, thickness, shoulder or step, chamfer and grade are produced from drawing, with the bore, outside and faces finished from one setup so the wall stays even. Buyers may specify the dimensions to match an existing shaft or housing, the grade for the temperature and the electrical duty, and the surface finish where the ring seats. Drawings and samples are accepted, OEM and ODM are supported, and a custom sample takes about 15 days.

 

Packaging & Transportation

 

Rings are wrapped in bubble film and stacked in a rigid inner box with EPE between pieces, so faces cannot touch. Inner boxes go into export corrugated cartons; heavy or large-diameter rings are packed in fumigated wooden cases with the IPPC mark. Cartons carry fragile, this side up and keep dry marks, and a shipping mark with order number, carton number and destination. EXW and FOB Shanghai or Ningbo are available.

 

Specifications

Parameter

Specification

Material

99% or 95% alumina ceramic

Dielectric Strength

15 kV/mm or more

Volume Resistivity

Greater than 10^12 Ω·cm

Max Working Temperature

1600°C

Size Tolerance

±0.5 mm or less

Bulk Density

3.6 g/cm³ or more

product-900-675

 

FAQ

 

Q1. Can the ring be matched to a shaft we have measured?

A. Yes. The bore and the outside are finished from one setup, so the ring can be produced against the measured shaft or housing rather than a nominal size.

Q2. Which material should be used, alumina or steatite?

A. Alumina is used where the ring also sees heat or a chemical; steatite is the lower-cost choice for a lower-temperature electrical insulation duty.

Q3. What is the minimum order?

A. Orders start at RMB 1,000 in value, enough for a trial ring or a small set.

 

Hot Tags: ceramic insulating rings, China ceramic insulating rings manufacturers, factory, Ceramic Motor Terminal Block, Ceramic Wire Guide Plate, Ceramics In Semiconductors, electrical ceramics, Temperature Control Ceramic, Wear Resistant Ceramics for Instrumentation

Send Inquiry

Send Inquiry